![OPTIMO Logo RGB Positive](https://pcp.structpim.com/media/1170/optimo-logo-rgb-positive.png?anchor=center&mode=crop&rnd=132548344710000000&width=115&height=0,https://pcp.structpim.com/media/1170/optimo-logo-rgb-positive.png?anchor=center&mode=crop&rnd=132548344710000000&width=230&height=0 2x)
Antislip Profielen STAR
C034004100pRoestvaststaal AISI 304
Halffabricaten Type S zijn geschikt voor offshorefaciliteiten. Ze worden gekenmerkt door grote gekartelde gaten en worden toegepast daar waar extreme afwatering en antislip eigenschappen vereist zijn. Type S halffabricaten worden bijvoorbeeld gebruikt als offshore treden in jachthaven, scheeps- en visserijfaciliteiten. PcP. offshore halffabricaten worden geproduceerd conform geldende Europese codes en standaards.
Halffabricaat type S is uitermate geschikt om hier zelf veiligheidsroosters en traptreden van te fabriceren.
Het is mogelijk om de halfabricaten te laten afkorten op de door u gewenste maat. Neem hiervoor vrijblijvend contact op met ons team van specialisten.
![OPTIMO-Plank-S-AISI304-Self-Colour-3000x150x30x2-C034004100p-1.jpg](https://pcp.structpim.com/media/16484/optimo-plank-s-aisi304-self-colour-3000x150x30x2-c034004100p-1.jpg?anchor=center&mode=crop&rnd=132410637380000000&width=540&height=540,https://pcp.structpim.com/media/16484/optimo-plank-s-aisi304-self-colour-3000x150x30x2-c034004100p-1.jpg?anchor=center&mode=crop&rnd=132410637380000000&width=1080&height=1080 2x)
![OPTIMO-Plank-S-AISI304-Self-Colour-3000x150x30x2-C034004100p-2.jpg](https://pcp.structpim.com/media/16485/optimo-plank-s-aisi304-self-colour-3000x150x30x2-c034004100p-2.jpg?anchor=center&mode=crop&rnd=132410637390000000&width=540&height=540,https://pcp.structpim.com/media/16485/optimo-plank-s-aisi304-self-colour-3000x150x30x2-c034004100p-2.jpg?anchor=center&mode=crop&rnd=132410637390000000&width=1080&height=1080 2x)
Specificaties
- Antislip perforatie: R11 = 27° > hellingshoek > 19° volgens DIN 51130
- Luchtstroom: 25-27 %
- Geponste gaten: 21 mm
- Afvoergaten: 21 mm
- Matrix antislipgaten: 50 x 40 mm
- Ballproof: 35 mm volgens NEN-EN 14122-2
Andere materialen
Downloads
-
Brochure
-
Datasheet
Standaard afmetingen
Lengte (mm) | Breedte (mm) | Hoogte (mm) | Dikte (mm) | Oppervlakte behandeling | StockAvailability | Item nummer | |
---|---|---|---|---|---|---|---|
3000 | 150 | 30 | 2 | Onbehandeld | Voorraadartikel | C034004100p | |
3000 | 200 | 30 | 2 | Onbehandeld | Voorraadartikel | C034014100p | |
3000 | 250 | 30 | 2 | Onbehandeld | Voorraadartikel | C034024100p |
Item nummer | |
---|---|
C034004100p | |
C034014100p | |
C034024100p |