Plank Grating D
F960200100Steel
Steel gratings with a closed surface as an alternative to e.g. chequer plates. The raised D pattern provides good slip resistance and the opaque surface provides extra safety when walking on e.g. bridges or decks. OPTIMO grating D in steel is made by welding panels together and subsequently welding on either edge bars or kick flats to the steel grating. We design - in collaboration with the customer - grating decks and solutions, so that we find a product that suits your needs and also carry out cutouts for e.g. pipe penetrations etc.
Specifications
- PTV guidelines: 36+ Low Slip Potential acc. to BS 7976
- Dry PTV average: 86 multi-directional acc. to BS 7976
- Wet PTV average: 60 multi-directional acc. to BS 7976
- Free area: ~0 %
- Heel proof
- Closed surface
- Ball proof: 15, 20, 35 mm in accordance with BS 4592
- Fire resistance: Critical temperature 550 °C
OPTIMO grating D is manufactured by welding panels together and subsequently welding on either edge bars or kick flats to the grating. We also carry out cutouts for e.g. pipe penetrations and finish the steel grates with hot-dip galvanizing according to the current standard. We design - in collaboration with the customer - grating decks and solutions, so that we find a product that fits your needs.
The length of the grating (L) corresponds to the span direction
PcP OPTIMO® gratings are composed of several panels. The narrower the panel, the greater the span can be. Span direction corresponds to the longitudinal direction of the grating. Click on the picture to see a schematic diagram.
L = Length of grating in span direction
W = Width of grating
Downloads
-
PDF Drawing
-
Brochure
-
Manual
-
Datasheet
-
Certificate
